Car Parking Barrier Boom Barrier Gate Barrier Supplier

Alpha Office Equipments Center supplies and install parking boom car barrier in Cebu area, Visayas and Mindanao area in Philippines. The company has already installed multiple sites from subdivisions, parking area, commercial and residential condominium. We have set-up from simple push button to complex access control set-up. Types and prices of parking boom barrier are as follows:

WD-158 PLUS WHITMAN AUTOMATIC CAR BARRIER
 - all steel body
 - aluminum boom
 - maximum arm length: 4.5 meters
 - operated via push button control(inclusive)
 - extremely durable: weatherproof
 - with protective rubber lining

PHP 42,000.00

WD-701 PLUS WHITMAN AUTOMATIC CAR BARRIER
- aluminum boom
- all steel body
- 4.5 meters maximum arm length
- push button operated
- extremely durable: weatherproof
- with protective rubber lining
- 5,000 entries per day

PHP 46,000.00

WD-201 WHITMAN AUTOMATIC CAR BARRIER
- 10,000 entries per day
- aluminum boom
- all steel body
- maximum arm length: 4.5 meters
- operated via push button
- extremely durable: weatherproof
- superheavy duty
- fast opening time (3 seconds)

PHP 60,000.00

INFINITY MANUAL CAR BARRIER
- all steel body
- aluminum boom
- maximum arm length: 4.5 meters
- manual operation
- durable and weatherproof

PHP 30,000.00










For more info and site survey call us at (032) 260-6346; 260-7100; 260-6448; 0927-333-4551 or email us at alpha.cebu@yahoo.com.

You can visit our shop at Door D #345 M.J. Cuenco Avenue corner L. Tudtud St., Mabolo, Cebu City, 6000, Cebu, Philippines

Read More

Automatic Boom Barrier - Lapu-lapu City Philippines Installation

Read More

HOW TO PROGRAM NIDEKA X639 BIOMETRIC TIME RECORDER

X639 FINGERPRINT TIME RECORDER INSTRUCTIONAL MANUAL

To operate your Nideka X639 fingerprint time recorder accurately and efficiently kindly follow the instruction thoroughly.

To Enroll a Fingerprint Template for a New Employee (User)

• Press " Menu"
• Press "OK"
• Press "OK" to Enroll
• Press "OK" for User Enroll
• Press "OK" for New Enroll
• Press "OK" for Finger
• Input desired ID number or accept default ID number provided by the machine ( The ID number should be distinct )
• Press "OK"
• Press finger to the scanner 3X for fingerprint template storing
• Press Finger First!
• Press Finger Second!
• Press Finger Third!
• Press "OK" to enroll another entry or "ESC" to exit procedure.

To Enroll Another Fingerprint Template for the Same Employee (User)

• Repeat the first 4 steps on how to enroll using fingerprint
• Press "🔻" to go to Backup Enroll
• Press "OK"
• Press "OK" for Finger
• Input desired ID number which was used by the employee in enrolling her/his fingerprint to enroll another fingerprint template for the same employee
• Press "OK"
• Press another finger to the scanner 3X to backup new fingerprint template
• Press Finger First!
• Press Finger Second!
• Press Finger Third!
• Press "OK" to backup another entry or "ESC" to exit procedure.

To Enroll a Password for New Employee (User)

• Press "MENU"
• Press "OK"
• Press "OK" to Enroll
• Press "OK" for User Enroll
• Press "OK" for New Enroll
• Press "🔻" to go to Password
• Press "OK"
• Input desired ID number or accept default ID number provided by the machine ( The ID number should be distinct )
• Press "OK"
• Type in your Password
• Press "OK"
• Retype your Password for Confirmation
• Press "OK"
• Press "OK" to enroll another entry or "ESC" to exit procedure.

To Enroll a Password for an Existing Employee (User)

• Repeat the first 4 steps on how to enroll using password
• Press"🔻" to go to Backup Enroll
• Press "OK"
• Press "🔻" for Password
• Press "OK"
• Input desired ID number to enroll another password template for the same employee
• Press "OK"
• Type in your Password
• Press "OK"
• Press "OK" to backup another entry or "ESC" to exit procedure

To Enroll Manager

• Press "MENU"
• Press "OK"
• Press "OK" to Enroll
• Press "🔻" for Manager Enroll
• Press "OK"
• Press "OK" for New Enroll
• Press "OK" for Finger
• Input desired ID number or accept default ID number provided by the machine ( The ID number should be distinct )
• Press "OK"
• Press finger to the scanner 3X for fingerprint template storing
• Press "OK" to enroll another entry or "ESC" to exit procedure

To Delete Template

• Press "MENU"
• Press "OK"
• Press "🔻" to go to Delete
• Press "OK"
• Input desired ID number to be deleted
• Press "OK"
• Press "OK" to Delete
• Press "OK" to continue delete or "ESC" to exit procedure.

To Set Date and Time

• Press "MENU"
• Press "OK"
• Press "🔻" to go to Time Set
• Press "OK"
• Press Arrow Keys and "OK" to set the Date and Time
• Press "ESC" to exit procedure.

To Download Files

• Connect USB FLASH DRIVE to X639
• Press "MENU"
• Press "OK"
• Press "🔻" to go to Download
• Press "OK" for USB Download
• Press "OK" for GLOG
• Download Success "DOWNLOAD OK!"
• Press "ESC"
• Unmount USB FLASH DRIVE

This biometrics X639 Fingerprint Time Recorder is user friendly and works so efficient, upon purchase it comes with an easy to use Time and Attendance Software. Most elementary school in Mandaue City, Cebu and Lapu-lapu City Cebu uses this biometrics. I can say that this one is proven and tested. You can check it at our store located in Door D #345 M.J. Cuenco Avenue corner L. Tudtud Street, Mabolo, Cebu City beside Petron Gas Station or you can also check with our display in any National Books Store Outlet. You can also contact us (032)260-6346; (032)260-6448; (032)260-7100; 0927-333-4551.

Is your company experienced or having problem with attendance keeping then this is the solutions. A stolen time is also a stolen money.

You can also check our youtube tutorial on how to use X639 Fingerprint Time Recorder: https://www.youtube.com/watch?v=bN_Fbg1AwXQ&feature=youtu.be

We are hoping that this will help you.

Thank you!

Read More

HOW TO PROGRAM YOKATTA DX-6 BUNDY CLOCK TIME RECORDER

HOW TO PROGRAM A YOKATTA DX-6 BUNDY CLOCK TIME RECORDER
( Detachable Power Cord )

Before we start to program a yokatta dx-6 bundy clock time recorder, we must identify first the functions that we need to program on the bundy clock. This are the following functions with corresponding sequence number. The function codes are often bigger than the sequence number.

SEQ. NO.      FUNCTIONS

01                  YEAR  ( Ex. 2016 )
02                  MONTH & DATE  ( Ex. 0612 - May 12 )
03                  HOUR & MINUTE ( Ex. 1010  - 10:10 )
04                  DAY LINE CHANGE TIME  ( Ex. 00:00  - 12:00 midnight, default )
05                  PRINTING POSITION ( 08:08 - default )
06                  SURFACE DETECTION ( 00/01 )
07                  HOURS FORMAT ( 12/24hrs )
08                  SETTING CARD FORMAT ( IGNORE )
09                  DAYLIGHT SAVING TIME ( IGNORE ) (0101)
10                  PRINTING FORMAT ( 00 )
11                  TIME CARD TYPE & PAY PERIOD ENDING DATE ( IGNORE )

--------------------------------------------------------------------------------------------------------------------------

PROGRAMMING

-  Open the key switch using the key included during the delivery of the unit.

1. Look for the "SET -UP" labeled on the unit and turn the switch to the left, follow the arrow. Wait for the buttons to blink and so with this setting number at the upper left side "01" ( year ). Press " ENTER" so that the  "year" will blink, press (+) or (-) to adjust the correct year, and then press enter. ( ex. 2017 )

2. Sequence number "02" ( small number at the upper left side of the LCD) will now blink which indicates to the month & date setting. Press " ENTER" button so that the "MONTH" will blink, press ( - ) ( + ) button to adjust to the correct month, press "ENTER" button again so that the "DATE" will blink, press ( - ) ( + ) button to adjust to the correct date and then, press "ENTER" ( ex. 03 03  / March 03 ).

3. Sequence number "03" (small number at the upper left side of the LCD ) will now blink which indicates "HOUR" and " MINUTE" setting. Press " ENTER" so that the hour will blink, press( - )( + ) to adjust to the correct hour ( note: use military hours or 24 hours when setting the hours; ex. 1pm = 13 ) and press " ENTER " again so that the minutes will now blink, press ( - ) ( + ) to adjust to the correct minutes ( ex. 13 00 ).

4. Sequence number "04" ( small number at the upper left side of the LCD ) will now blink which indicates " DAYLINE CHANGE TIME " ( note: this is applicable only for the work schedule that goes beyond 12:00 midnight; ex. 10:00pm - 06:00am ). The default setting is "00 00" as shown on the LCD which means 12 midnight, upon reaching the time of 12 midnight printing on the time card will now transfer to the lower row as indicated to the present date.
Example 1: The hour on the bundy clock shows 23:00 hours on March 3, the printing on the time card will shows; March 3 - 23:00.
Example 2: The hour on the bundy clock shows 00:00 or 12 midnight as understood, the printing on the time card will shows: March 4 - 00:00.
If the work schedule of the company is graveyard shift work schedule, first thing to do is identify the time in and out of the work schedule. Example of time in is 10:00pm and the time out is 6:00am. Once you have the time schedule, count how many vacant hours from the last time out up to the first time in . Using the example the last time out is 06:00am and the first time in is 10:00pm, so we start counting the vacant hours from 6:00am up to 10:00pm the result is 16 vacant hours divide it by two the result is 8 vacant hours and add it to 6:00am to get the dayline change time which is 14:00 hours or 2:00pm.

5. PRINTING POSITION - IGNORE. The default printing position is 0808, this must appear on your LCD screen.

6. SURFACE DETECTION - this is one of the feature of the bundy clock which determines the right surface of the time card. The time card has two sides, side 1 for 1-15 period and side 2 for 16-31 period. To enable this feature, open the bundy clock, slide the switch to "SET-UP" then scroll up to number "6", then press "ENTER", select "00" and press "ENTER" and then slide back the switch. To disable the feature, follow the instructions but select "01" instead.
Note: If you enable this feature, you need also cut the bottom of your time card.

7. HOURS FORMAT - there are two selection for this setting, 12 hours format and 24 hours format. If you select 12 hours format for normal and 24 hours format for military hours.
For example: 12 hours format - 13:00 = 1:00 pm ( this will appear in your LCD screen and also to your time card.
                      24 hours format - 1:00 pm = 13:00 ( this will appear on your LCD screed and also to your time card.

8. SETTING CARD FORMAT - just ignore, not necessary to set, default only.

9. DAYLIGHT SAVING TIME - just ignore, not applicable in the Philippines.

10. PRINTING FORMAT - default only.

11. TIME CARD TYPE AND PAY PERIOD ENDING DATE - just ignore, default only.

You can check also our Youtube tutorial on how to use Yokatta DX-6 Bundy Clock: https://www.youtube.com/watch?v=ZO5isEXuTEE&feature=youtu.be

Call us for your additional needs of Bundy Clock Time Recorder!

Thank you!

May this guide will help you, for more questions just visit our store ALPHA OFFICE EQUIPMENTS CENTER, Door A #345 M.J. Cuenco Avenue corner L. Tudtud Street, Mabolo, Cebu City (032) 260-6346; (032) 260-6448; (032) 260-7100

Read More

WHY YOU SHOULD INSTALL A CAR BOOM BARRIER

Most common problem on parking areas of a high rise building with multi-level parking either basement or upper ground level parking is when a tenant's or unit owner's parking slot is often parked by someone else, these would probably cause headaches to the building administrator or property manager. Basically the parking slot owner would call their attention so that they can parked, they would ask them how did that happen that someone else parked on the slot assigned to them because most of these parking slot are often paid by the tenant and unit owner's they don't come as free if you lease a unit or buy a condominium unit.


A condominium unit owner's don't just owned a single vehicle, they often have more than two. High rise condominium buildings often has only one allocated parking slot for every unit owner's and if half of the population will bring in two vehicles inside the vicinity that would probably cause chaos inside. These type of day to day problem of a building administrator or property manager is not much different with those high rise commercial building. A single tenant don't just have one employee or just one client in day, a bulk of them probably and the worst case is it will be a bulk of vehicles also.

The immediate solutions to this is to control the number of vehicles that can parked inside and the best tool to help the security personnel in applying this solution is a car boom barrier. The driver will stop at the entrance of every vicinity seeing the car barrier boom blocked the driveway. This time a security personnel can check if the vehicle or the driver is allowed or not to park inside. They can limit the number of vehicles depending on the parking slots that can accommodate.


Other good thing with a car boom barrier is this could be your first line of defense for the security of every vicinity, a security personnel can perform inspection for every vehicle. Seeing a tight security for every vicinity provide ease of stay for every tenant and unit owners.

Whitman car boom barrier's are one of the best barrier to ever have, this barrier either manual or automatic has rugged designed to fit every location. Other features are as follows:
- all steel powder coated body
- aluminum boom
- maximum arm length is 4.5 meters (14.76 feet)
- extremely durable : weatherproof
- with protective rubber lining


To check this item you can visit Alpha Office Equipments Center at MJ Cuenco Avenue corner L. Tudtud Street, Mabolo, Cebu City. You can contact us at (032)260-6346; 260-6448 or check our website www.alphacebu.com

Read More

WHY YOU SHOULD INSTALL A WALK THRU WEAPONS METAL SCANNER

WHITMAN WALK THRU WEAPONS METAL SCANNER

Walk Thru Weapons Metal Scanner is a tool or equipment vital in maintaining the security of a vicinity. It is used to detect heavy and small sharp metal like guns and knife or even bombs. The safety of the public is always at the utmost concern for every security officers in-charge of the vicinity.

The Whitman Walk Thru Weapons Metal Scanner is equipped with adjustable sensitivity settings that allows the scanner to adapt to all situations.

Whitman Walk Thru Weapon Metal Scanner is ideal for the following areas:

- Airports, Seaports and Public Transportation Terminals

- Embassies

- Banks and Financial Institutions

- Courthouses, Police Facilities and Government Buildings

- Schools and Sports Stadium

- Hotels, Conference Centers and Casinos

- Shopping Centers

- Churches and Lecture Halls

- Hospitals

- Commercial Buildings

- Power plants and Research Sites

- Military Bases and Mining Operations

- Prisons and Jails

Read More